Skip to product information
1 of 3

Crafty Cuts Laser Pty Ltd

Mirror Acrylic - Smoke

Mirror Acrylic - Smoke

Material Thickness:
3mm (thickness may vary by up to 1mm between batches).

Single-Sided Mirror Effect:
This material has a glossy mirrored finish on the front and a matte grey backing on the reverse side. However, it comes with specific disadvantages (please see below).

Engraved Mirror Items:
Engraving on this mirror material produces a semi-transparent frosted effect. The base layer of the colored mirror is tinted acrylic, so the etched areas will appear as a lighter tone of the color you selected. Any glued attachments will be visible through the engraved areas.

Usage:
Best suited for small, medium, and large shapes that are at least 15mm in size. We do not offer this mirror material in mini shapes. Due to the laser injecting a lot of heat when cutting, mini shapes are not suitable.

Protective Paper:

  • Applied to both the front and back of solid shapes. This paper will need to be peeled off upon receipt.
  • For etched shapes, the paper film is applied only to the front. Peel it off to reveal your chosen mirror color.

Disadvantages:
While this acrylic is stunning, it was originally designed for industrial signage, not jewelry, so extra care is required when handling and using it.

  • Mirror acrylic is prone to showing marks and scratches easily. Scratches on the back will show through on the front.
  • I do not recommend gluing attachments onto mirror acrylic. It is best used for feature hanging charms only. If you do wish to glue, ensure you use a non-solvent-based adhesive, such as e-6000, but even this may show through to the front surface. There is also a risk of the attachment peeling off the grey mirror backing.
  • HASULITH glue is unsuitable for attaching items to mirror acrylic; please use e-6000 instead.
  • If the protective paper film is left on the grey reverse backing for too long, it can cause lifting at the laser-cut edges. Remove this side as soon as possible to avoid this issue. You can leave the paper on the mirror side until you're ready for final use.

Cleaning Tips:
For general cleaning of acrylic mirror, simply wash with clean, cold water and a little mild detergent. Use a clean microfiber cloth to gently dry. Do not use any solvents such as methylated spirits, turpentine, white spirit, or window cleaning products, as these will cause irreversible surface damage.

View full details